DeWalt DC927-XE Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 16

DeWalt DC927-XE Скачать руководство пользователя страница 14

12

NOTE:

Three Year Warranty is not applicable to items deemed as consumables. Radial

arm saws are covered by a one (1) year warranty only. D

E

WALT Reserves the right to

review its warranty policy prior to launch of any new business development products.

30 DAY NO SATISFACTION GUARANTEE

If you are dissatisfied with any D

E

WALT power tool, laser or nailer, for any reason,

simply return it to the point of purchase with your sales receipt within 30 days for a

replacement unit or a full refund.

FREE WARNING LABEL REPLACEMENT:

If your warning labels become illegible or

are missing, call (AUS) 1800 654 155 or (NZ) 09 259 1111 for a free replacement.

DC927-XE

HEAVY DUTY 13mm (1/2")
CORDLESS DRILL/DRIVER/HAMMERDRILL

D

E

WALT Industrial Tool Co., Baltimore, MD 21286 U.S.A.

For Service Information, Call 1-800-654155
www.D

E

WALT.com.au

WARNING:

To reduce the risk of injury, user must read

and understand instruction manual. Use proper eye
and respiratory protection. Use only D

E

WALT batteries.

«
...
12
13
14
15
16
»

Содержание DC927-XE

















Отзывы:

Нет отзывов