DeWalt D25961-XE, Инструкция по эксплуатации

Страница: 6 / 12

4
.............. Class II Construction ..............safety alert symbol
................... (double insulated) BPM ..........beats per minute
…/min ........ per minute RPM ..........revolutions per minute
IPM ............. impacts per minute
SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE
COMPONENTS (Fig. 1)
WARNING: Never modify the power tool or any part of it. Damage or personal
injury could result.
A. On/off switch
E. Tool holder
B. Main handle F. Side handle
C. Side handle clamping knob G. Retaining bolt
D. Tool retainer
B
A
D
F
E
C
G
FIG. 1
INTENDED USE
The D25961-XE heavy-duty demolition hammers are designed for professional
demolition, chipping and chasing applications. DO NOT use under wet conditions
or in presence of flammable liquids or gases.
These heavy-duty demolition hammers are professional power tools.
DO NOT
let children come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
ACTIVE VIBRATION CONTROL
The active vibration control neutralizes rebound vibration from the hammer
mechanism. Lowering hand and arm vibration, it allows more comfortable use for
longer periods of time and extends the life of the unit.
WARNING: ALWAYS wear approved protective safety equipment complying
with the following standards:
• Eye protection: AS/NZS1337 Eye Protectors for Industrial Applications;
• Hearing protection: AS/NZS1270 Acoustics – Hearing Protection;
• Respiratory protection: AS/NZS1716 Respiratory Protective Devices.
WARNING: Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products,
and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
•
Avoid prolonged contact with dust from power sanding, sawing, grinding,
drilling, and other construction activities. Wear protective clothing and
wash exposed areas with soap and water. Allowing dust to get into your
mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disburse dust, which may cause
serious and permanent respiratory or other injury. Always use approved AS/
NZS1716 respiratory protection appropriate for the dust exposure. Direct particles
away from face and body.
WARNING: Always wear proper personal hearing protection that conforms to
AS/NZS1270 during use. Under some conditions and duration of use, noise from
this product may contribute to hearing loss.
• The label on your tool may include the following symbols. The symbols and
their definitions are as follows:
V ................. volts A ...............amperes
Hz ............... hertz W ..............watts
min ............. minutes ...........alternating current
........ direct current ...........alternating or direct
current
.............. Class I Construction no ..............no load speed
................... (grounded) .............earthing terminal