10
Disconnect tool from air supply before adjusting,
clearing jams, servicing, relocating or during non-
operation.
Never place your hand or any part of your body in the
fastener discharge area of the tool when air supply is
connected to the tool. Serious personal injury may
occur.
LOADING THE TOOL
Loading the Tool
1. Disconnect air hose.
2. Pull feeder back into
"locked"
position.
(See Step 2)
3. Insert a stick of fasteners into the magazine. Make
sure the pointed ends of the fasteners are loaded with
the points downward. Also make sure fasteners are not
dirty or damaged. Use DeVilbiss fasteners or equivalent
for proper fastener performance.
(See Step 3)
4. Push release button and slide feeder shoe forward.
(See Step 4)
Handle the tool carefully. Respect the tool as a
working implement and always assume the tool con-
tains fasteners:
a. Never use the tool as a toy and engage in horse-
play.
b. Never aim or point the tool at anyone. The tool
may contain fasteners.
c. Always keep people and animals at a safe
distance from the work area in case of
accidental discharge of fasteners.
d. Never pull the trigger unless the nose of the tool
is
against
the work surface.
e. Do not pull the trigger or depress the contact trip
when loading the tool.
Protect your eyes and ears. Wear Z87 safety glasses
with side shields. Wear hearing protection. Employ-
ers and users are responsible for ensuring the user or
anyone near the tool wear this safety protection.
READ THIS MANUAL AND UNDERSTAND ALL
SAFETY WARNINGS AND INSTRUCTIONS BEFORE
OPERATING TOOL.
NOTE
Use DeVilbiss Air Power fasteners or equivalent for
proper performance of tool. See page 15 for fastener
information.
Step 3
Step 4
Step 2
OPERATING THE TOOL
Disconnect tool from air compressor before adjust-
ing, clearing jams, servicing, relocating and during
non-operation.
NOTE
Check and replace any damaged or worn compo-
nents on the tool. The safety warning labels on the
tool must also be replaced if they are not legible.
Содержание AFN5
Страница 13: ...13 EXPLODED VIEW 24...