Installation
Choose an appropriate bracket from the two included
(Short or Long).
To change the bracket, remove the screws on each side of the
camera, remove the current installed bracket and then replace it
with a new version. Reinstall the attaching screws to secure the
bracket to the camera.
For specific locations, there are two extended arms which will
allow the camera to be positioned forward.
1. Remove the bracket by loosening the securing screws and
axis screws on both sides.
2. Place the two extended arms and secure the supplied axis
screws to the camera. Then set the positioning screws back
onto the camera.
Note: slightly tighten the axis screw and make sure the
extended arms are still rotatable.
3. Use the axis screws to install the bracket onto the extended
arms and then secure the positioning screws. Adjust the
position required and tighten the positioning screws so as to
fix the camera to the desired view angle.
Note:
Some installations require the bracket to be installed in
the ATM machine before attaching to the camera.
In the accessory bag you have securing screws or thumb knobs
that can be used to secure the camera. Choose which works
best for the installation. Once the camera is mounted and
positioned, secure the camera by tightening screws.
Connection
Dual Voltage Version
Mount dual power board in desired location then attach the
camera lead. Next use the wire ended barrel plug to attach the
appropriate power source and plug into the mating connector
coming off the dual power board. Attach video cable and
installation is complete.
12VDC Version
Attach the camera lead then use the wire ended barrel plug to
attach the appropriate power source and plug into the mating
connector in the wire harness. Attach video cable and
installation is complete.
Make sure power is off before any connection is made.
Camera Installation and Connection
700TVL High Resolution
ATM Surveillance Camera Parts and Descriptions
24VAC/12VDC
Video Output
Camera Lead Connector
Dual
Power Board
* Supplied with Dual Power model only
** 12VDC only model cannot connect to dual power board
ATM
Surveillance Camera
OSD
Control Board
OSD
Control Board Cable
Long
Bracket
Extended
Arms
Wire-ended Power
Adaptor Lead
Camera Lead
Connector
* Supplied with 12VDC model only
** 12VDC: connect directly to camera
Screw Accessories
*2 Knurling Knobs
*4 Black Screws
*4 Silver Shoulder Screws
*1 Top Thumb Screw
12VDC
Video Output
Short
Bracket
OSD Control Connector
Camera Lead Connector
Remove the bracket from the camera
1
2
Set up the extended arms
3
Secure the bracket and the extended arms onto the camera
Bracket Adjustments
4
Installation
Short Bracket
Long Bracket
Short Bracket
with Extended Arms
Long Bracket
with Extended Arms
Note:
There are multiple mounting positions on the extended arms which provide flexible mountings to different ATM machines.
V531-KA005-S00
VER. 06/2015
www.devieweurope.com
ATM Surveillance Camera
User Manual
