Develop ineo 25e, Быстрое руководство

Страница: 63 / 72

ineo 25e 4-11
4.5 Energy and noise data according to RAL-UZ 122 4
Options
The following items can be installed on your machine to increase functionality and performance. For details,
please contact your local technical representative.
4.5 Energy and noise data according to RAL-UZ 122
4.5.1 Power Consumption and Switch Time
*1 Averaged values, measured without accessory.
*2 Time elapsed after the last copy until the device enters the mode. Entered is the set value from
manufacturer. If changes are possible, the value will be set in ( ).
*3 Recovery time is the amount of time it takes to return to ready mode.
*4 Maximum power consumption, short peak after switch on.
*5 Sleep Mode. This mode will be entered by pressing and hold the <Energy Save> for approximately three
seconds, or automatically after the preset time. Refer to the Administrator’s Guide.
*6 Power consumption of 0 Watt is only achieved by disconnecting the machine from the power line.
Items Description
500-sheet paper cassette You can attach an additional paper cassette to enable
increased paper storage or to hold a variety of paper
sizes/types.
2-bin tray You can sort the output to a second tray.
Mechanical counter This counts the number of printed pages.
PostScript Enabler This enables printing from Mac OS.
Barcode Font Enabler This enables the printing of barcode and OCR fonts.
PostScript/Barcode Font Enabler This enables printing from Mac OS, as well as the print-
ing of barcode and OCR fonts
PostScript Memory This is an option for the PostScript Enabler.
This enables the printing of PDF files including
JPEG2000 images or large size files.
Confirmation stamp You can stamp a document that has been scanned.
Operating Mode Power consumption
*1
(Watt)
Switch on 1030
*4
Copying
(24 pages/minute) 520 Activation Time
*2
(minute)
Ready 35 0 Recovery time
*3
(sec.)
Energy save mode
*5
2,1 1 (1-60) 12,04
Switch off
*6
0,1 Switch activated 20,84