Develop ineo 250 Скачать руководство пользователя страница 187 | Manualshive

Страница: 187 / 770

Develop ineo 250 Скачать руководство пользователя страница 187

11. Tech. Rep. Mode

Field Service Ver. 1.0 Aug. 2005

148

bizhub 200/250/350

Adjustment / Setting

11. Tech. Rep. Mode

11.1 Tech. Rep. Mode function setting procedure

NOTE
• Ensure appropriate security for Service mode function setting procedures. They

should NEVER be shown to any unauthorized person not involved with service
jobs.

A. Procedure
1.

Press the Utility/Counter key.

2.

Touch [Check Detail].

3.

Press the following keys in this order.
Stop

→

0

→

0

→

Stop

→

0

→

1

4.

Enter the 8-digit service code and touch [END]. (Default value: 00000000)

NOTE
• When [END] is touched after a wrong service code has been entered, the Basic

screen reappears.

• At the fourth access after entries of three wrong access codes, [END] is not avail-

able on the screen. It is therefore necessary to turn OFF and ON the Main Power
Switch.

• If you forget the service code, it becomes necessary to replace the RAMS Board

with a new one. Take necessary steps not to forget the service code.

• The RAMS Board is not available as a replacement part. If it requires replacement,

contact Office Printing Support Division by way of CSES.

5.

The Tech. Rep. Mode menu will appear.

NOTE
• To change the service code, see “Service Security Mode.”

☞

B. Exiting
• Touch the [Exit] key.

C. Changing the Setting Value in Service Mode Functions
• Use the +/- key to enter or change the setting value.
• Use the 10-Key Pad to enter the setting value. (To change the setting value, first press

the Clear key before making an entry.)

4040F3E543DA

«
...
185
186
187
188
189
...
»

Содержание ineo 250



































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов