manualshive.com logo in svg

Develop ineo 250, Руководство по обслуживанию в полевых условиях, Страница: 661 / 770

Поделиться
Скачать
Develop ineo 250 Скачать руководство пользователя страница 661

Revision history

After publication of this service manual, the parts and mechanism may be subject to change for
improvement of their performance. 
Therefore, the descriptions given in this service manual may not coincide with the actual machine.

When any change has been made to the descriptions in the service manual, a revised version will be
issued with a revision mark added as required. 

Revision mark:

• To indicate clearly a section revised, show 

 to the left of the revised section. 

A number within 

 represents the number of times the revision has been made.

• To indicate clearly a section revised, show 

 in the lower outside section of the correspond-

ing page. 
A number within 

 represents the number of times the revision has been made.

NOTE

Revision marks shown in a page are restricted only to the latest ones with the old ones deleted.

• When a page revised in Ver. 2.0 has been changed in Ver. 3.0: 

The revision marks for Ver. 3.0 only are shown with those for Ver. 2.0 deleted.

• When a page revised in Ver. 2.0 has not been changed in Ver. 3.0: 

The revision marks for Ver. 2.0 are left as they are.

1

1

1

1

2005/08

1.0

—

Issue of the first edition

Date

Service manual Ver.

Revision mark

Descriptions of revision

Содержание ineo 250



































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов