Develop ineo 250 Скачать руководство пользователя страница 361

Страница: 361 / 770

3. Troubleshooting procedures

Field Service Ver. 1.0 Aug. 2005

Standard Controller

roubleshooting

3.2

Unable to specify desired settings or unable to print as speci-
fied

No.

Symptom

Probable cause

Action

A printer driver setting can-
not be selected.

Some functions cannot be com-
bined.

Do not try to select settings that
are not available.

The “Conflicts” message
with “Unable to Select” or
“Function Canceled”
appears.

An incorrect combination of func-
tions has been specified.

Check the settings and specify
the functions correctly.

Printing is not performed
as specified.

Incorrect settings are specified.

Check each setting in the printer
driver.

A combination of functions,
although possible in the printer
driver, is not possible with this
machine.

The paper size, orientation, and
other settings specified in the
application have priority over
those specified in the printer
driver.

Enter the correct settings in the
application.

The watermark cannot be
printed.

The watermark is not correctly
set.

Check the watermark settings.

The watermark density is set to a
level that is too low.

Check the density settings.

Watermarks cannot be printed in
graphics applications.

No watermark can be printed in
this case.

The staple function cannot
be specified.

Stapling is not possible if “Paper
Type” is set to “Thick” or “Trans-
parency”.

Check each setting in the printer
driver.

The staple function requires
optional finisher.

Install the required optional fin-
isher and enable it using the
printer driver.

Stapling cannot be per-
formed.

Number of pages that can be sta-
pled: Up to 50 pages of Letter
A4R or smaller plain paper.

Print by specify the number of
pages per set for the number of
pages that can be stapled.

Number of pages that can be cen-
ter-stapled: Up to 15 pages of
plain paper.

Stapling is not possible if the doc-
ument contains pages of different
sizes.

Check the document.

The stapling position is not
as expected.

The orientation setting is not cor-
rect.

Check the stapling position in the
printer driver setup dialog box.

The hole punch function
cannot be specified.

Hole punching cannot be speci-
fied if “Booklet”, “Transparency”,
“Thick2”, “Thick3”, or “Envelope”
is selected.

Check each setting in the printer
driver.

For the hole punch function, the
punch unit must be installed on
optional finisher.

Install the required optional fin-
isher and enable it using the
printer driver.

Содержание ineo 250



































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ineo 250

Отзывы:

Develop ineo 250, Руководство по обслуживанию в полевых условиях, Страница: 361 / 770

Результаты поиска

Содержание ineo 250

Отзывы: