Develop ineo 250 Скачать руководство пользователя страница 217 | Manualshive

Страница: 217 / 770

Develop ineo 250 Скачать руководство пользователя страница 217

11. Tech. Rep. Mode

Field Service Ver. 1.0 Aug. 2005

178

bizhub 200/250/350

Adjustment / Setting

6

Setting the Center ID and telephone number of
the Center
1. Select [Tech. Rep. Mode]

→

[CS Remote

Care], and touch [Detail Setting].

2. Touch [Basic]

→

[Center ID], and input the

Center ID (five digits).

☞

3. Touch [Center Phone No].
4. Input the telephone number of the Center

using the 10-Keys Pad and [P], [T], [W], [-]
keys.

☞

Setting the Center ID
1. Select [Tech. Rep. Mode]

→

[CS Remote

Care], and touch [Detail Setting].

2. Touch [Basic]

→

[Center ID], and input the

Center ID (five digits).

☞

7

Setting the Device ID
3. Touch [[Fwd]

→

[Device ID], and input

Device ID (nine digits).

☞

Setting the Device ID
4. Touch [Device ID], and input Device ID (nine

digits).

☞

8

Inputting the Device telephone number
5. Touch [Device Phone No].
6. Input the Device telephone number using the

10-Key Pad and [P], [T], [W], [-] keys.

☞

Setting the Respond Timeout
1. Select [Tech. Rep. Mode]

→

[CS Remote

Care], and touch [Detail Setting].

2. Touch [Respond Timeout] and enter the

response timeout using the 10-Key Pad.

NOTE
• Under normal conditions, there is no

need to change the default setting.

☞

9

Inputting the AT command for initializing the
modem
1. Select [Tech. Rep. Mode]

→

[CS Remote

Care]

→

and touch [Detail Setting].

2. Touch [AT Command].
3. Input AT Command.
NOTE
• Change this Command only when it is

necessary. (They do not need to be
changed in normal condition.)

• For details on AT Command, see the man-

ual for the modem.

☞

Setting the E-mail address
1. Select [Tech. Rep. Mode]

→

[CS Remote

Care]

→

and touch [Server Setting].

2. Touch [Initial data].
3. Select [Yes] and touch [Enter] to perform ini-

tialization.

4. Touch [Server for RX] and set POP3 Server

Address, POP3 User Name, POP3 Pass-
word, and POP3 Port Number.

☞

5. Touch [RX Settings] and set E-Mail Address,

Auto-RX Check, Connection Timeout, and
APOP Authentication.

☞

6. Touch [TX Settings] and set SMTP Server

Address, SMTP Port Number, Connection
Timeout, and Authentication Setting.

☞

7. Touch [TX/RX Test] and press the Start key

to carry out the transmission/reception test.
Make sure that data is correctly transmitted
and received and then proceed to the next
step. If the test fails, make checks again by
following the instructions given as the error
message; then, carry out the transmission/
reception test once again.

☞

Step

Procedure

Using the telephone line modem

Using E-mail

«
...
215
216
217
218
219
...
»

Содержание ineo 250



































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов