manualshive.com logo in svg

Develop ineo+ 25, Руководство пользователя

Поделиться
Скачать
Develop ineo+ 25 Скачать руководство пользователя страница 192

Scanning With the Machine

7-14

2

Use the keypad to type in the number (between 1 and 250) for the speed 
dial destination, and then press the 

Select

 key.

The information registered for the speed dial destination appears for two 
seconds.

3

Press the 

Select

 key again.

If an FTP address or an SMB address was selected, the destination 
address is specified.

4

If an e-mail address was selected, press the 

+

 or 

,

 key to select [FIN-

ISH], and then press the 

Select

 key.

d

To add an additional e-mail address, select [ADD] in step 4, and 
then specify the destination. When sending the data to an FTP 
address or SMB address, multiple addresses cannot be specified.
To check the specified e-mail address, select [CHECK/EDIT] in 
step 4. To delete an address, select [CHECK/EDIT] in step 4, and 
then continue with step 2 of "Deleting a Specified Destination 
Address".

Selecting a Group Dial Destination

A maximum of 20 group dial destinations can be registered on this machine. 
(A maximum of 50 e-mail addresses can be registered with one group.) Fol-
low the procedure described below to specify e-mail addresses from the 
registered group dial destinations as the recipient of the scan data.

d

For details on registering e-mail addresses as group dial destinations, 
refer to “Registering Group Dial Destinations” on page 7-25.

d

A group dial destination containing a telephone number cannot be 
used in Scan mode.

1

With the main screen (Scan mode) or [Can Use AddressBook] displayed, 
press the 

Addressbook

 key three times so that [GROUP DIAL] appears.

2

Use the keypad to type in the number (between 1 and 20) for the group 
dial destination, and then press the 

Select

 key.

The information registered for the group dial destination appears for two 
seconds.

3

Press the 

Select

 key again.

Содержание ineo+ 25





















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды