Develop ineo+ 224, Инструкция по эксплуатации

Страница: 140 / 176

7
7-6 ineo+ 224/284/364/454/554
[Shift Output Each Job]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Output Settings] - [Shift Output Each Job]
Select whether to shift paper for each job before ejection.
[Yes] is specified by default.
Tips
- This option is available when the Finisher or Job Separator JS-506 is installed.
[Date/Time Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Date/Time Settings]
Specify the current date and time and time zone of this machine.
[Weekly Timer Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Weekly Timer Settings]
Select whether to automatically switch between power save and normal mode using the weekly timer.
To use the weekly timer, specify the schedule for switching between power save and normal modes. Option-
ally, you can use the tracking function that automatically sets a schedule to fit your office usage.
Settings Description
[Current Time] Enter the current date and time.
•
[Set Date]: Automatically adjust the date and time of this machine using
an NTP server. To perform time adjustment, set the time difference be-
tween UTC and your local time in [Time Zone] and tap [Set Date].
This button is available if an NTP server has been registered by select-
ing [Administrator Settings] - [Network Settings] - [Detail Settings] -
[Time Adjustment Setting].
[Time Zone] To automatically adjust the time of this machine using an NTP server, set
the time difference between UTC and your local area in multiples of 30 min-
utes.
Settings Description
[Weekly Timer ON/OFF
Settings] Specify whether to use the weekly timer. Then, select a power save mode
for the machine to enter according to the weekly timer.
For details, refer to page 7-7.
[Time Settings] Specify the time for switching to the power save mode ([OFF Time]) and the
time for returning to the normal mode ([ON Time]) for each day of the week.
For details, refer to page 7-7.
[Date Settings] Configure the day to which the weekly timer is applied.
Select the day to which the weekly timer is applied by switching the calen-
dar by [Year] and [Monthly]. Optionally, you can collectively configure the
appropriate days for each day of the week using [Daily Setting].
For details, refer to page 7-7.
[Select Time for Power
Save] Specify whether to set a time zone for switching the machine in the normal
mode with the weekly timer enabled temporarily to the sleep mode during
lunch time, for example.
For details, refer to page 7-7.
[Password for Non-Busi-
ness Hours] Specify whether to restrict the use of this machine in the Power Save mode
by requesting a password.
For details, refer to page 7-7.
[Tracking Function Set-
tings] Specify whether to use the tracking (learning) function that automatically
sets the weekly timer schedule to fit the operating status of your office.
For details, refer to page 7-8.
[Display ON/OFF Time] Displays the switching times to enter the power save mode ([OFF Time])
and to the normal mode ([ON Time]) set by the tracking function.
For details, refer to page 7-8.