Devatec ElectroVap KIT MC 15 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 48

Devatec ElectroVap KIT MC 15 Скачать руководство пользователя страница 4

ELECTROVAP® KIT MC

4

1. SAFETY INSTRUCTIONS

1.1

INTRODUCTION

You recently purchased the ElectroVap® ELMC, and we hope you enjoy this product. Thank you for the
trust you place in us. The safety instructions contained in this manual are intended for specialized,
qualified, and authorized personnel.

To get the best results from the humidifier, we recommend to:

• Read carefully the assembly and installation instru

ctions in this manual.

• Keep this manual in a safe place for future reference

.

• Transmit this manual in case of sale or transfer of the device, in order to guarantee the transmission

of information about it.

SAFETY WARNINGS AND SYMBOLS USED IN THE MANUAL

Danger! Caution.

General safety instruction, whose violation could lead to malfunctions and / or bodily harm to
person and / or property damage.

Danger! High voltage.

There are high voltages inside the device or one of its components, the negligence of this warning
can lead to serious bodily injury or death to people and / or significant material malfunctions.

Danger! High temperature.

The ElectroVap® ELMC uses steam during the operation and therefore surfaces and pipe-work
become very hot. Ensure that equipment not sustaining high temperatures is kept away.

Electrostatic hazard.

The components of the device may be subject to deterioration as they are very sensitive to
electrostatic discharge.

Möbius strip.

Some components of the device are recyclable, the user is responsible for the removal of these.
Follow the recycling recommendations adapted to the materials according to the geographical
area.

• If your package is

damaged or missing, please make a complaint to your carrier with a receipt

acknowledgment letter within 24 hours and make a declaration to your Devatec agent.

• Pictures, graphics, and values may be subject to technical changes without

notice.

• Keep this instruction manual carefully, and if you have any questions that are not answered in this

manual, do not hesitate to contact us, or consult your Devatec agent.

Our team will be pleased to be of assistance!

«
...
2
3
4
5
6
...
»

Содержание ElectroVap KIT MC 15

















































Отзывы:

Нет отзывов