DEVA Deva037, Руководство пользователя, Страница: 16 / 24

Page 10
Software Installation
Deva037 USB Encoder Interface User’s Manual
Manual
Figure 3.4 Config Editor – code entry
Figure 3.5 Config Editor – configuration enabled
On the main screen (Figure 3.3 ), press ‘Restore’. Browse through the USB stick to
X:\Deva CMM Control Relxx\DevaCMMCtrl\DefaultConfigs\Deva037CmmDefaultConfig
(‘xx’ varies
according to device installed). Press ‘Apply’ and ‘Close’.
This will result in a basic configuration being setup with default values such as number of
axes and axis types; the Deva Config Editor can then be used to customize the configuration
as part of the machine installation. For more information see the Deva Config Editor manual.
3.2.2.2 Testing
The installation may be tested using the supplied DevaCMM Control Panel, as follows:
Ensure that at least one compatible encoder is plugged into a 15-way 'D' type connector on
the device (in the case of the following example, an encoder is connected to the X Axis). See
Section 2.
Open the DevaCMM Control Panel program and a display similar to Figure 3.6 will be seen.
Note that, for the example shown, the
X axis is datummed at Position 550.00 and the ‘At
Target’ box is checked.