DEVA Broadcast DB3012, Инструкция по техническому обслуживанию и эксплуатации

Страница: 33 / 57

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
- 33 -
WEB Interface
DB3012 is also controlled through a built-in web server. A standard web browser can be used
to monitor its status or to make some adjustments. There are two options for access to the WEB
interface of DB3012:
• via a standard WEB browser by specifying the device’s IP address (the IP address should be
manually identified first);
• via the “Network discovery” option.
MANUAL IP ADDRESS IDENTIFICATION
Connect the device to a local network or to the Internet by the applied LAN cable. Through the
front panel navigational menu pressing the [OK] button will enable you to enter the device main
menu.
Using the [RIGHT] navigational button find the Status section located at the end of the menu.
Press the [OK]button to enter the
Status
section. Via the front panel navigational menu press the
[DOWN] button.
This operation will visualize the screen containing information about the IP address of the
device. Open a new WEB Browser and enter the device IP address in the address field then press
[Enter].
NOTE:
Due to the inability of some WEB browsers to read the IP address format displayed
on the screen of the device, the numbers included in the IP address must be written without the
leading zeros. For example: 192.168.020.095 must be written as 192.168.20.95
A window that requires username and password will appear.
Default values being – Username : user or admin , Password : pass
NETWORK DISCOVERY
This is a network setting that defines whether your computer can see (find) other computers and
devices on the network and whether other computers on the network can see your computer. By
default, Windows Firewall blocks network discovery but you can enable it.
1. Open Advanced sharing settings by clicking the Start button, and then on “Control Panel”.
In the search box, type “network”, click “Network and Sharing Center”, and then, in the left
pane click “Change advanced sharing settings”;
2. Select your current network profile;
3. Click Turn on network discovery, and then click save changes.
NOTE:
If you’re prompted for an administrator password or confirmation, type the password,
provide confirmation or contact your system administrator.
If you have already enabled this function on your computer DB3012 will be automatically
added to the Device list section. The device will be ready for usage and no additional adjustments
will be required except user name and password.