Customer Documentation DEV 5071
Copyright DEV Systemtechnik GmbH 2007-2017
11
4
INSTALLATION INSTRUCTIONS
4.1
SCOPE OF DELIVERY
1 *
DEV 5071 High power DC supply
equipped with the number of power supply modules as ordered
1 *
DEV 65-0033 Grounding fixture
8 *
M6 nuts, AF 10 mm
(for the DC connections, please refer to chapter 4.2.2)
1 *
Customer documentation (this document)
1…4 *
AC power cords
A
A
The product is generally delivered without power cords except for deliveries within
Germany and to Switzerland.
4.2
INSTALLATION OF THE PRODUCT
4.2.1
Mechanical Integration of the Product
4.2.1.1 Installation of the Grounding Fixture
Before installing the DEV 5071 into a 19" rack, the DEV 65-0033 grounding
fixture being part of the delivery has to be assembled to the rear side of the
chassis. It is the choice of the customer, how the bracket is to be installed:
on the left side or on the right side, and
the grounding bolt facing towards the rack or towards the chassis
In the following figure, it was chosen the right side and the grounding bolt
direction towards the rack.
For the assembly of the bracket first unscrew the two M2.5 x 4 mm screws
on the fixture using a PH1 screwdriver. Align the bracket towards the chassis
in a way as indicated by "
1.
" Then shift the bracket to the right ("
2.
"), so that
the bracket resides in the two recesses of the chassis. Finally, screw on the
bracket with the two M2.5 x 4 mm screws ("
3.
").
1 .
2 .
3 .
3 .
