DEUTSCHMANN AUTOMATION UNIGATE RS232/422 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 67

DEUTSCHMANN AUTOMATION UNIGATE RS232/422 Скачать руководство пользователя страница 57

29.4.11

UNIGATE fieldbus gateway for ProfibusDP V. 4.7

57

Deutschmann Automation GmbH & Co. KG

Commissioning guide

Example:
The Profibus-ID is 26 decimal = 1A hexadecimal
The switch "Profibus-ID High" must be set to 1 and the switch "Profibus-ID Low must be set to A.

From software V4.1 on the UNIGATE PB features the following functions:
If the rotary switch is set to "7E" (=126) on the Profibus-side (Profibus-ID), the gateway operates
with a Profibus-address, that is stored in the EEROM. In the state of delivery this address is set
to 126 and can only be changed by a Profibus-master via the Profibus itself.
The address 126 is reserved in the Profibus for this purpose; that means that a slave with this
address can never carry out a data exchange, but it can only be configured with a new ID.
In case the rotary switch is set to a value between 0...125, the gateway operates - with this Profi-
bus-ID and a change via the master is not possible.

Attention:
The Profibus address set must correspond to the planned address under
COM Profibus !
It is read in only on power-up of the gateway!

17.7 Profibus connection

Connect the device to the Profibus at the interface labelled "ProfibusDP".

17.8 Connection to the process device

Please also read the User Manual provided for the process device when commissioning the pro-
cess device.

17.9 Connecting the supply voltage

Please connect 10.8...30 DC voltage to the terminals provided for this.

17.10 Shield connection

Earth the DIN-rail onto which the module has been snapped.

17.11 Project planning

Use any project planning tool for project planning.
If the required GSD file was not supplied with your project planning tool, a sample file can be
downloaded from our website at

www.deutschmann.de

.

17.12 Literature

We recommend that you read book "Schnelleinstieg in ProfibusDP", author M. Popp, to help you
quickly get to grips with the subject of the ProfibusDP and the mode of operation of the available
ASICs. The book can be ordered from the Profibus User Organisation, Order No. 4.071.

Address:
Profibus Nutzerorganisation e.V.
Haid-und-Neu-Str. 7
D-76131 Karlsruhe
Germany
Tel: 0721 9658 590

«
...
55
56
57
58
59
...
»

Содержание UNIGATE RS232/422




































































Отзывы:

Нет отзывов