manualshive.com logo in svg

DEUTSCHMANN AUTOMATION UNIGATE RS232/422, Инструкция по эксплуатации, Страница: 41 / 67

Поделиться
Скачать
DEUTSCHMANN AUTOMATION UNIGATE RS232/422 Скачать руководство пользователя страница 41

29.4.11

UNIGATE fieldbus gateway for ProfibusDP V. 4.7

41

Deutschmann Automation GmbH & Co. KG

Housing variations

13 Housing variations

Optional Deutschmann Automation GmbH & Co. KG supplies gateways with housing-variations 
that fulfill the protection type IP 65/66.

Housings are designed to protect installations against dangers from the outside. These dangers 
can be of diverse nature and they are very important for the selection criteria of a specific hous-
ing variation. It should be decisive for the decision which dangers are to be considered at the 
place of action and which conditions the environment stipulate.

Now Deutschmann Automation offers two different housing-variations:

•

Aluminium housings

•

High-grade steel housings

•

(Polycarbonate housings, only supplied until January 2006)

Aluminium housings are robust terminal housings for distributions and connections of machines 
and plants, high-grade steel housings are particularly used in aggressive environments and in 
the hygiene field (Housing data, see chapter 16.2).

13.1  Main operational fields for housings

Main operational fields of aluminium housings with protection type IP 66

•

Machines, control- and plant manufacturing

•

In aggressive and rough environmental conditions e.g. sea water field / on ships

•

Electrical- and building installation engineering

•

Measuring-, switching- and controlling technique

•

EMC Directives - relevant fields

•

Heating-, air-conditioning- and ventilation technique

•

Medical field

Main operational fields of high-grade steel housings with protection type IP 66

•

In aggressive and rough environmental conditions e.g. sea water field

•

In fields with highest purity and cleanness (e. g. food field)

•

EMC Directivies applications

13.2  Mounting instruction

Mounting instruction of the aluminium housing

The assemble with the dimensions (160x160x90 BxHxT) is developed for wall mounting.

Mounting

1. Using the drill template (see chapter 20 "Drilling templates") and mark the four holes (the mea-

sures can also be taken from the reverse side of the housing).

2. Unscrew the cover and fix the housing with four screws (max M6) in the marked holes.

  3. The housing have to be fixed on a grounded mounting place.
  4. Under the housing must be 5 cm place for the insertion of the cable.

Attention: All leads have to be shielded.

  

Содержание UNIGATE RS232/422




































































Отзывы:

Нет отзывов