manualshive.com logo in svg

DEUTSCHMANN AUTOMATION UNIGATE CL ProfibusDP, Инструкция по эксплуатации, Страница: 46 / 50

Поделиться
Скачать
DEUTSCHMANN AUTOMATION UNIGATE CL ProfibusDP Скачать руководство пользователя страница 46

Servicing

Deutschmann Automation GmbH & Co. KG

46

UNIGATE fieldbus gateway UNIGATE CL - ProfibusDP  V. 2.3

17.6.10

17 Servicing 

Should questions which are not covered in this Manual crop up, please contact us directly.

Please note down the following information before calling:

•

Device designation 

•

Serial number (S/N)

•

Article number 

•

Error number and error description 

You can reach us during hotline hours which are as follows 

Monday to Thursday from 8 am to midday and from 1 pm to 4 pm, Friday from 8 am to midday.

Deutschmann Automation GmbH & Co. KG
Carl-Zeiss-Straße 8
D-65520 Bad-Camberg
Germany

Central office and sales department

+49-(0)6434-9433-0

Technical hotline 

+49-(0)6434-9433-33

Fax sales department 

+49-(0)6434-9433-40

Fax technical hotline 

+49-(0)6434-9433-44

E-mail technical hotline

[email protected]

17.1  Returning a device

If you return a device, we require as comprehensive a fault/error description as possible. We 
require the following information in particular:

•

What error number was displayed?

•

What is the supply voltage (±0.5 V) with Gateway connected?

•

What were you last doing or what last happened on the device (programming, error on 
power-up, ...)?

The more precise information a fault/error description you provide, the more exactly we will be 
able to pinpoint the possible causes.

17.2  Downloading PC software

You can download current information and software free of charge from our Internet server.

http://www.deutschmann.de   

Содержание UNIGATE CL ProfibusDP



















































Отзывы:

Нет отзывов