Basic device TERM 6 (external operating unit)
Deutschmann Automation GmbH & Co. KG
82
Instruction manual LOCON 24, 48, 64 , LTC, TERM 24 and TERM 6 V. 8.8
24.7.12
15 Basic device TERM 6 (external operating unit)
15.1 Assembly of the instrument
This external control- and display unit consists of a plastic housing with overall dimension
W72xH96xD18 mm for front sheet installation and W72xH96xT28 mm for DIN-rail mounting.
It is adjusted for programming cam controls (LOCON, ROTARNOCK) and has the same keys,
status LEDs and display possibilities as LOCON.
In this respect the programming is just like LOCON and no additional training is required.
On the 16 LEDs below the seven-segment-display the first 16 outputs of the connected cam con-
trols are displayed with a delay of maximum 500ms.
The connection to the cam control takes place via a serial wire. According to the standard type a
RS485-connection (DICNET) and optionally a RS232-connection is supported.
The correct wiring of the instruments among themselves is described in the chapter "Networking
terminals with cam controls and PCs".
15.2 View TERM 6
Picture 12: TERM 6
