AL-436-00-902 EnoSense People Counter
Product manual
Page 7 of 18
© DEUTA Controls GmbH
Paffrather Str. 140, 51465 Bergisch Gladbach
Tel.:+49 2202 285 57- 61
01.12.2021
Hauptstraße 76, 32479 Hille
Tel: +49 5734 51466 - 0
Technical data might change
www.deuta-controls.dnet
Fax:+49 5734 51466 - 28
•
Push area to open sensor (access to battery holder)
4.3 Observe intended use
The
AL-436-00-902 EnoSense People Counter
must not be used in any relation with
equipment that supports, directly or indirectly, human health or life or with applications
that can result in danger for people, animals or real value.
4.4 Observe statutory provisions for operating frequency range.
The
AL-436-00-902 EnoSense People Counter
must only be operated in compliance
with the country-specific provisions regarding operation of radio equipment.
4.5 Non-conduction mounting surface
A non-conductive mounting surface is necessary.
Ensure the
AL-436-00-902 EnoSense People Counter
is mounted on a non-
conductive surface. If it is not, performance may be adversely affected.
