USER MANUAL
9
DESOI GmbH | Gewerbestraße 16 | D-36148 Kalbach | Phone +49 6655 9636-0 | Fax +49 6655 9636-6666 | [email protected] |
www.desoi.de
2.4 Qualification of personnel
All work on or with this product may only be carried out by qualified and trained professionals or trained or trained personnel, who, due
to their professional training, special training courses, and experience have sufficient skills and experience in handling this product.
The personnel must have read the safety instructions and information contained in this operating manual, be familiar with them,
understand them, and be able to act accordingly.
•
Specialist employee:
has obtained the necessary knowledge due to professional training. This person is able to
recognise potential dangers independently and to avoid hazards.
•
Instructed users:
were verifiably familiarised with this product via a instruction by the operator. In doing so, tasks were
assigned to them and they were made aware of potential hazards due to improper behaviour.
•
Trained employee:
is qualified, due to special instruction by the manufacturer of the product, to carry out maintenance
and repair work, to recognise potential dangers independently, and to avoid hazards.
Permitted activities
Necessary qualification
Note!
Young people under the age of 16
are not allowed to "operate or
assemble this product".
Connection and operation
Instructed user
Cleaning and decommissioning
Instructed user
Service and maintenance
Specialist employee /Trained employee
Repair - mechanical
Specialist employee /Trained employee
Repair - electrical
Specialist employee or Desoi GmbH
2.5 Bestimmungsgemäße Verwendung
If faults occur, the mains plug must be pulled out immediately and the "main switch of the drive
unit" must be set to the OFF position!
NOTE:
•
The relevant safety data sheet for the material being conveyed must be observed in all cases. Furthermore, the
cleaning agents recommended by the manufacturer must be used.
•
Where necessary, other standards, legal provisions and sets of rules must, depending on the country of use, be
respected if this product is to be operated outside the European Community (e.g. country-specific guidelines,
electrical standards such as the UL standard, CSA standard, etc.).
•
The operator of the product is solely responsible for damage resulting from incorrect use.
•
The respective specialist company or the operator itself is liable for damages resulting from improper installation,
repair or maintenance.
•
Make sure that this product is not exposed to direct rain.
•
When working with this product, wear eye protection, hand protection, foot protection and suitable working
clothes.
HAZARD!
In accordance with 1999/92/EC, the machine must not be operated in "any" area in which explosive atmospheres
could arise.
•
Products without Ex approval are
"not"
suitable for operation in an explosive atmosphere.
"DANGER TO LIFE"
CAUTION!
Intended use also includes:
•
It must be ensured that no foreign particles or other contaminants get into the product.
•
Reading this operating manual, as well as consideration of all the information herein, particularly the safety and
usage instructions, as well as compliance with and implementation of all inspection and maintenance work within
the prescribed time intervals.
•
The proper use, maintenance and repair of the product requires relevant professional expertise in the field of
injection technology, partly in electrical engineering, pneumatics, hydraulics or mechanics.