USER MANUAL
13
DESOI GmbH | Gewerbestraße 16 | D-36148 Kalbach | Phone +49 6655 9636-0 | Fax +49 6655 9636-6666 | [email protected] |
www.desoi.de
3.0
Transport, Storage and Interim Storage
3.1
Transport safety
•
Equipment damage
3.2
Delivery of the product
•
Transport inspections
•
Storage
3.1 Transportsicherheit
CAUTION! when transporting with pure muscle
power
Risk of injury due to "dead weight" and incorrect transport methods
•
Before carrying the machine ensure that the safety clamp fits tightly.
(see detail E)
•
Only carry the machine using the existing carrying device
(see
Fig.
3.1.1.marked in red). Ensure
in advance that the drive unit is secured
via the safety clamp.
(blue arrow)
•
Never carry the machine with oily or greasy hands or gloves. The
machine could slip out of your hands and create additional hazards.
•
Ensure that supply lines and material hoses pose no further danger
to yourself or others.
•
Wear suitable work clothes and foot protection.
Fig.3.1.1
DANGER! RISK OF FATAL INJURY caused by possible damage to the product
Incorrect transport methods may cause damage to the products concerned If damage has occurred during transport, the
corresponding components must always be checked and the functions of the device ensured by qualified personnel. Failure
to observe this advice can result in serious personal injuries and damage to the environment.
•
Transport via the mains plug cable of the drive unit is strictly forbidden!
3.2 Delivery of the product
NOTE!
Check the product and the corresponding accessories for transport damage, completeness and correctness of the
consignment immediately after delivery. Claims for missing parts or damages incurred during transport can be made only
via the transport insurance if the damage from the forwarding agent (also driver) has been confirmed.
All identified transport damages - including hidden - which only become visible after opening the respective packaging,
must be reported in writing immediately to the carrier who made the delivery; if necessary a damage inspector should be
commissioned to assess the damage. The carrier who made the delivery must be in receipt of the damage notification at the
latest by the 6th day after delivery of the goods. Please send a copy of this notification to Desoi GmbH in Kalbach. In cases
of non-compliance with the above information, damage will be deemed to have occurred subsequent to delivery, according
to
Section 60b
of the General German
Freight Forwarding Terms and Conditions (ADSp.)
. In this case, the burden of proof
is reversed.
The delivery of the product success in a ready to use condition, only the accessories required in each case still have to be prepared.
The product is normally shipped in a carton box, protected against dust and moisture on a suitable palle
Transport inspections:
Upon receipt of the product, immediate checks for transport damage should be carried out.
If transport damage is discovered, the necessary steps must be taken with the freight carrier or
manufacturer within the relevant time periods.
Storage:
Before use or when in temporary storage, the product must be kept dry, free of frost and protected from
mechanical damage.