USER MANUAL
11
DESOI GmbH | Gewerbestraße 16 | D-36148 Kalbach | Phone +49 6655 9636-0 | Fax +49 6655 9636-6666 | [email protected] |
www.desoi.de
2.6 Prohibited operation
NOTE!
The operator of the respective device is responsible for all damage to persons and property arising from any improper
use, not Desoi GmbH!
WARNING!
If the product is not used as intended, there is no guarantee that it will operate safely.
This product is not designed for any use other than that set out in section 2.5, and so any such use is considered
a prohibited mode of operation.
In particular, we would like to point out that it is not permitted to:
•
use this product for distribution/transfers of unlisted feed materials.
•
use this product for private purposes.
•
operate this product in rooms with explosive air and gas mixtures, with high levels of humidity and severe dust pollution of
the room air.
•
operate this product with unauthorised spare parts or unauthorised accessories.
•
to operate this product with self-made spare parts or accessories.
•
To carry out structural changes of any kind on this product which could affect the function or safety.
2.7 Handling the product and auxiliary materials
WARNING!
Handling auxiliary materials or other chemical substances
•
When working with materials, detergents, oils, greases, and other chemical substances that are to be processed,
the safety and dosage information of the respective manufacturer as well as the generally applicable regulations
are to be observed.
•
Residues of cleansing agents, oils, greases, and other chemical substances should be recycled or disposed of in
accordance with the relevant legal provisions.
•
Local, regulatory sewage protection laws apply.
•
Wear eye protection, hand protection and suitable working clothes!
Installation, upkeep, maintenance, and repair work
•
Upkeep and cleaning work may only be carried out by experts or by specially trained personnel.
•
Maintenance and repair work may only be carried out by trained and qualified personnel.
•
After these works are completed, the proper functioning of all safety devices as well as the flawless operation of the product
must be ensured.