TRANSPORTATION, PREVENTATION AND TEMPORARY STORAGE
DESMI Pumping Technology A/S
Tagholm 1
9400 Nørresundby
– Denmark
Tlf. nr.: +45 96 32 81 11
Fax +45 98 17 54 99
19
E-mail: [email protected] www.desmi.com
3.3. Storage/Preservation
If commissioning is to take place some time after delivery, we recommend that the following
measures be taken for pump (set) storage.
CAUTION
RISK OF PROPERTY DAMAGE!
Incorrect storage condition could cause damage to the pump (set)!
Make sure that the storage space is in correct humidity.
Make sure that the storage location is clean and without vermin.
For outdoor storage, cover the packed or unpacked pump (set) and accessories with
waterproof material.
CAUTION
RISK OF PROPERTY DAMAGE!
Wet, contaminated or damaged openings and connections could cause leakage or
damage to the pump!
When you put the pump into storage, clean and cover the pump openings and
connections as needed.
Store the pump (set) in a dry, protected room where the atmospheric humidity is as constant as
possible. Rotate the shaft by hand once a month. For storing a pump (set) that was operated, the
shutdown measures must be adhered to.
See also: DESMI Pump Storage and Preservation at:
www.desmi.com/media/vqkjqh54/t1534uk.pdf
3.4. Return to supplier
1. Drain the pump as per operating instructions.
2. Always flush and clean the pump, particularly if it was used for handling noxious, explosive, hot
or other hazardous fluids.
3. If the pump set handled fluids whose residues could lead to corrosion damage in the presence
of atmospheric humidity or could ignite upon contact with oxygen, the pump set must also be
neutralised, and anhydrous inert gas must be blown through the pump to ensure drying.
4. Always complete and enclose a certificate of decontamination when returning the pump (set).
Always indicate any safety and decontamination measures taken.
Содержание NSL 100-215
Страница 2: ......
