background image

D

D

1/4”-20P x 3/4” x 2

  

ROUND HEAD SCREWS

1/4”-20P x 3/4” x 1

FLAT HEAD MACHINE SCREWS

FOLD REVERSELY FOR 
TOP STRIKE INSTALLATION

TOP LATCH ASSEMBLY

TEMPLATE(B-1)

LINE W

1 39/64”

6

1/

7

2

FLAT HEAD MACHINE SCREWS

CAUTION:

DRILL”F” HOLE AFTER LATCH BOLT
PROPERLY WORKS.

FOLD ON DOTTED LINE

Frame Stop

AND FIT ON DOOR 

FRAME

CAUTION:

BE SURE THE DISTANCE FROM DOOR
FRAME TO LINE W MUST BE 2”

Note: When installing top latch assembly:
1. Drill (1) E hole and install screw but 
    do not tighten all the way.
2. Make sure distance from door frame
     to line W is 2".
3. Drill (2) D holes and install and 
    tighten screws.
4. Tighten screw in hole E all the way.

(A)For 2000V Series (UL Listed)-Drill & tap for (3) 1/4"-20P x 3/4" machine screws (2xD,E) for latches
     Drill (3) 7/32" pilot holes (2xD,E) for self tapping machine screws or wood screws for latches.

(B)For F2000V (Fire Rated)-Drill 9/32" holes (2xD,E) inside and 3/8" holes (2xD,E)
     outside for the (3) thru bolts. 

1 ”

1/4”-20P x 3/4” x 2

G

G

F

1/4”-20P x 3/4”

 

ROUND HEAD SCREW

2”

2012.03

3/32"

Adjust the location of the top
 latch assembly and top latch
 base so there is 3/32" space 
between top strike and inside
 of top latch.

CAUTION:

E

TOP STRIKE

TOP LATCH BOLT

Содержание 2000V Series








Отзывы: