background image

PORTABLE FORCED
AIR HEATER

(WITH BUILT-IN THERMOSTAT)

OWNER’S MANUAL

IMPORTANT: Read and understand this manual before assembling, start-
ing, or servicing heater. Improper use of heater can cause serious injury.
Keep this manual for future reference.

®

 Fill In For Your Records

Model No. ___________________

(Located on side panel)

Serial No. ___________________

(Located on fuel tank)

Heater Sizes:

110,000, 115,000,
150,000, 155,000,

and 165,000 Btu/Hr

H.S.I. Series

TABLE OF CONTENTS

SAFETY INFORMATION ............................................. 2
UNPACKING ................................................................ 2
PRODUCT IDENTIFICATION ...................................... 3
ASSEMBLY .................................................................. 3
FUELS ......................................................................... 4
VENTILATION .............................................................. 4
THEORY OF OPERATION .......................................... 4
OPERATION ................................................................ 4
OPERATION WITH PORTABLE GENERATOR .......... 5
PREVENTATIVE MAINTENANCE SCHEDULE .......... 5
TROUBLESHOOTING ................................................. 6

SERVICE PROCEDURES ........................................... 7
WIRING DIAGRAM .................................................... 11
SPECIFICATIONS ..................................................... 11
STORING, TRANSPORTING, OR SHIPPING ........... 11
ILLUSTRATED PARTS BREAKDOWN ..................... 12
PARTS LIST ............................................................... 13
REPLACEMENT PARTS ........................................... 15
TECHNICAL SERVICE .............................................. 15
ACCESSORIES ......................................................... 15
WARRANTY AND REPAIR SERVICE ....................... 16

Содержание H.S. I. 110,000

















Отзывы: