background image

ASSEMBLY PROCEDURE

1. Push in and hold trigger lockout button. Squeeze and hold trigger. (see Figure 1, Steps 1 and 2)
2. Continue to hold trigger while sliding the handle bracket onto chain saw handle (see Figure 1, Step 3). The

trigger support on the bracket will hold the trigger in the “ON” position (see Figure 2).

3. Attach pole assembly to chain saw. Align the holes in the pole bracket and handle bracket. Using four Philips

head screws and lock washers provided, insert screws through lock washers and holes in pole bracket. Tighten
screws securely with screwdriver into weld nuts of handle bracket (see Figure 2).

4. Plug chain saw power cord into receptacle end of pole assembly power cord (see Figure 3).

Figure 1 - Attaching Handle Bracket to Chain

Saw Handle

Step 3

  - Slide Handle Bracket onto Chain Saw

Handle. 

Note: Verify Trigger Support is Under the

Trigger and the Trigger is in the “ON” Position.

POLE SAW ASSEMBLY

Pole/Bracket Replacement Kit - 110731R

Figure 2 - Attaching Pole Saw Bracket to

Handle Bracket

Figure 3 - Connecting Chain Saw Power Cord

to Pole Assembly Power Cord

111006-02

Rev. A

02/04

P.O. Box 90004
Bowling Green, KY 42102-9004
U.S.A.

www.desatech.com

TECHNICAL SERVICE

You may have further questions about assembling, operating,
or maintaining this product. If so, you can visit our Technical
Service web site at 

www.desatech.com

 or contact our Tech-

nical Service Department at 1-800-858-8501 (English Only),
7:30 AM to 4:30 PM CST (M-F). You may also write to:

DESA Specialty Products™
P.O. Box 90004, Bowling Green, KY  42102-9004
ATTN: Technical Service Specialty Products

When contacting DESA Specialty Products™, have ready
• Your Name
• Your Address
• Your Phone Number
• Model Number of Product
• Date of Purchase (Include copy of receipt for written requests).

Handle Bracket

Pole Assembly

Pole Bracket

Philips Head
Screw (4)

Lock
Washer (4)

 WARNING: Verify both saw and pole are not connected to power source before assembly.

1

3

2

Handle Bracket

Trigger Support

Lockout Button

Step 2

 - Depress Trigger

Trig-

Step 1

 - Push In

Lockout Button

Pole Assembly Power
Cord Receptacle

Chain Saw
Power Cord

Отзывы: