Operating manual
(GB)
Seite 6/32
6.
Mounting ‚D
lite®
vanera’ at the rail
Loose both flat head screw of the face plate and remove the face
plate. Remove the fluorescent lamps und fit the lamp according
picture.
Displace the lamp sideway and fit it with the enclosed allen key.
Note: Do not clamp the internal wiring between the rail and the
lamp. Pass the internal wiring beside the clamps.
Assemble the fluorescent lamps and the face plate re-tighten both
flat head screws (max 1 Nm).
7.
Putting into Operation
Before placing the light into operation, the user has to check whether mains
voltage and frequency specified on the rating plate are identical.