Derbi ATV DXR 200, Руководство по ремонту

Страница: 150 / 194

149
6-1. S
ERVICE
P
RECAUTIONS
(E
LECTRIC
D
EVICES
)
01. After operation, the terminal caps must be installed securely (Fig. 6-01).
02. When disconnecting the connector, the lock on the connector shall be released first (Fig. 6-02)
03. Hold the connector body when connecting or disconnecting it. Do not pull the connector wire (Fig. 6-03).
04. Check if any connector terminal is bending, protruding or loose (Fig. 6-04).
05. The connector must be inserted completely. If the double connector has a lock, lock it at the correct
position. Be checked if there is any loose wire (Fig. 6-05).
06. Before connecting a terminal, check for damaged terminal cover or loose negative terminal (Fig. 6-06).
07. insert the terminal completely. Check the terminal cover for proper coverage. Do not make the terminal
cover opening face up (Fig. 6-07).
08. Secure wire harnesses to the frame with their respective wire bands at the designated locations. Tighten
the bands so that only the insulated surfaces contact the wire harnesses (Fig. 6-08).
09. After clamping, check each wire to make sure it is secure (Fig. 6-09) .
10. Do not squeeze the wire against the weld or its clamp (Fig. 6-10).