Deprag AST11-1, Руководство по эксплуатации, Страница: 37 / 122

37
8.2.2 Keypad Layout
8.2.2.1 Function Keys
In automatic mode, the function keys have the following functions:
left function key:
manual reloading of a screw when operated with feeder
right function key: part approval when using the F-Function, if this function has been en-
abled in the relevant menu.
In different menu items the function keys are assigned to different functions. The display
shows which functions are assigned to function keys, e.g. in the menu item speed test to
start and stop the test run and to enter the desired speed.
8.2.2.2 Numerical Keypad and ESC-key
Use the numerical keypad to input number values (such as nominal speed), to set a pa-
rameter or to perform a test. Always confirm any numerical input with RETURN-key.
Use the ESC-key to interrupt your input; the original value remains intact.
8.2.2.3 Menu and Cursor Keys
The menu keys have the following functions:
m in automatic mode, the main menu can be called up with this key
DEL use the DEL-key to remove incorrect numerical inputs.
ESC use the ESC-key to change into the next higher menu-level, to exit the indi-
vidual menus or to cancel an input.
RESET use the RESET-key to reset an error, which occurred while operating in the F-
function, if the corresponding menu allows such a reset.
↑ ↓ navigation in the menu, the up- and down- keys move the cursor either up or
down
Enter use the ENTER-key to change to the selected menu item
Table 15: Menu and Cursor Keys