7
5
Short Description
The ME6000 is a measuring device, which is designed for measuring using DMS
measuring platforms, piezo measuring platforms/torque wrenches and external
transducers. DMS platforms and external transducers, either from DEPRAG or from
other manufacturers can be connected.
It is operated by use of the delivered software. The software is available in various
languages.
The calibration value can be set for the chosen sensor. There are three options for
measurement: measurement using start/stop, measurement with automatic end
recognition and with series recognition. The seria
n operates with au
end recognition.
You can choose from various measuring units t
he measurement resu
required you can enter limit values for the measurement results. Then the measurement
value is shown highlighted in colour whether the measurement results are inside or
outside the measurement values.
he process of measurement (screw assembly) is displayed graphically if required. The
graph can be labelled with markers. A zoom function enables easy evaluation of a
screw assembly. The measurement data can be saved in a file and reloaded later. The
measurement graph can be saved in either bitmap or jpg format and also directly used
in other applications using copy and paste.
Statistical evaluations are calculated by average, standard deviation and standard
deviation in percentage. The machine performance index (C
m
and C
mk
) is calculated by
means of the set tolerance in relation to the average value. The tolerance is given in
percentage. Alternatively the upper and lower limits can also be altered.
The analogue instantaneous value display constantly shows the measurement value
which is measured on the measuring platform or with an external transducer.
l recognitio
tomatic
o display t
lts. If
T