45
11.6 Change Calibration Values
the measurement electronic or if the
values must be
nd on page 10 of
the calibration certificate of your ME6000.
Click on SETUP in the main window and then on CHANGE CALIBRAT. VALUES. The
window “Set-Up Calibration Values“ is opened.
After first start up, after every new calibration of
measurement electronic is connected to a different PC, the calibration
checked and changed if necessary. The calibration values can be fou
Picture 51: Setting the calibration values
Enter the calibration values from the factory calibration certificate in the corresponding
entry fields in the window “Set-Up Calibration Values”. The value can either be directly
entered or changed using the arrow buttons.
Click on OK, to save calibration values.
Click on BACK, to leave the window without saving changes.
11.7 Help
For help click on HELP in the main window. Adobe Reader starts up and shows this
help. Close the file and Adobe Reader to close help.