43
11.5 Set Up
The ME6000 program is available in various
language can be chosen. Click on SETUP in the main wind
The window “Setup” opens.
languages. In Set Up the required
ow.
lts should
e switched on. Alternatively, you can enter the target value and the tolerance in
percentage. In this case, the ME6000 software calculates the values for minimum and
Th
w
ed
Click on CHA
on values for the
E6000 (see
Picture 50: Select Language, Limit and other settings
Choose the required language in the section <Select Language>.
Check the box “Invert sign” in section <Miscellaneous> if the ME6000 software should
show the measured value with opposite sign.
Activate the box “Display limit overshoot” and enter the values in the fields “Min:” and
Max:” in the section <Limit>, if limit value monitoring of the measurement resu
“
b
maximum.
ill be carri
e unit for the minimum and maximum values as well as the target value
over from the main window.
NGE CALIBRAT. VALUES, in order to enter the calibrati
M