33
Click on the symbol
in the toolbar to set the markers. The marker mode is activated
ton on the graph display. Every marker is
t. The measurement value of the marked
d side of the graph display window.
when the marker symbol is displayed as grey.
To set a marker, click with the left mouse but
numbered. Up to four marker scan be se
position is displayed on the right han
Picture 33: Graph display with three markers set
In the example the value at the position of the first marker is 53.59 N·cm and at the
position of the second marker 46.16 N·cm.
11.2.5 Delete Markers
Previously set markers can be deleted using the toolbar.
Picture 34: Delete last set marker from the graph
To delete a marker from the graph display, click on the symbol
on the toolbar or
press Ctrl+D. The last marker set is then deleted. If more markers have been set,
e graph too. The
lso deleted.
ph can be loaded using the toolbar.
continue clicking the delete button to delete these from th
orresponding display of the measurement value is then a
c
11.2.6 Load Graph
A previously saved gra
Picture 35: Open a saved graph