28
The current measurement within a
series is shown below the field MEASUREMENT.
ent value during assembly to torque and
a positive measurement value. In order to
case a setting can be registered in the
Set
Picture 21: Series measurement
Some screwdrivers show a negative measurem
when loosing the screw assembly they show
receive a positive measurement value in this
Up
so that the measurement
11.1.7 Minimise Program
value prefix is inverted.
The ME6000 program can be minimised when there is not enough space on the screen
and measurements can still be carried out all the same. All settings which have been
e
y
C
n
ntered sta
lick the m
the same.
i imise button to minimise the program.
icture 22: M
P
inimise ME6000 program
he settings, the measurement value will be
In this minimised format measurements can be carried out using START/STOP,
automatic or series measurements. The values are displayed in the blue field. If you
have activated the limit display in t
highlighted in colour.
ogram
are shown below the field MEASUREMENT.
play in the settings, this field will be green, orange or
e button.
Picture 23: Minimised ME6000 pr
The current measurements within a series
If you have activated the limit dis
red, otherwise it is blue.
To maximise the ME6000 program click on the maximis