24
starts after reaching the threshold value. This threshold value always relates to the end
value of the chosen measurement range.
The trigger may vary between 1% and 100%.
Example
: A piezo measurement platform is used. The measurement unit is set on
N·cm. The measurement range is between 8 and 48 N·cm. The trigger is increased to
25%. The result is that the graph recording first begins when the value has exceeded
25% of the end of the measurement range. In this example that is 12 N·cm.
Picture 12: Graph with delay = 5 and trigger = 25%
11.1.5 Limit Value Monitoring
You can set in set-up (see also
Set Up
), whether torque monitoring should be carried
out. The minimum and maximum values for the torque are also set in the set-up.
The field MEASUREMENT changes colour after successful measurement so that it is
easy to tell whether the measurement result is inside or outside the limit for the
measurement values.
Meanings of colours in the field MEASUREMENT:
Colour Meaning
green
the torque measured is inside the limits for min and max
orange the torque measured is below the minimum value
red
the torque measured is above the maximum value
blue
limit value monitoring is deactivated