Drilling points 100 mm
Screw ST4 25 mm
Installation
1. Unpack the box and check for the following items enclosed:
a. Main unit with built-in magnetic hook switch
b. Handset
c. Handset cord
d. RJ45 Ethernet cable
2. Connect the handset to the base unit using the coiled handset cord provided
3. Connect one end of the Ethernet cable to the WAN port of the main unit, and the other end to the
wall Ethernet outlet
Wall position
Align slot of wall mounted bracket over the 2 screws. Gently pull down the
phone until it is held by the 2 screws.
Phone starting
The Premium 50 SIP comes with the DHCP mode selected.
You can configure the phone only if this one acquired a dynamic IP address.
So a DHCP server is required on the LAN. If necessary, download on internet a DHCP free software
(e.g. “tftpd32”) and install on your PC to configure the Premium 50 SIP.
Be sure that your PC is connected to the same VLAN with the phone.
After the DHCP server allocated an IP address to the Premium 50 SIP, if you pick up the handset you
can hear a tone. The configuration page can be accessed via your web browser by entering the
phone IP address.
If necessary, please consult your network administrator.
To discover the phone IP address
1.
Lift the handset
2.
Hear the dial tone
3.
Press * 1 2 3 4 5 #
4.
Listen to the IP address being announced by the handset receiver
Depaepe - Premium 50 SIP - User Manual v1.3
3/14
