Depaepe 27112017, Руководство пользователя

Страница: 19 / 49

SecurAccess SIP PMR – User Guide EN
19
3.7. Video monitoring
The SecurAccess SIP PMR is fitted with a wide angle colour video camera allowing visitors
monitoring, by which it can make a video call or a remote monitoring, with an IP videophone or
with the dedicated Depaepe PC software.
The doorphone video streaming can be permanently watched or only during call activity.
It is possible to record videos and images with the dedicated PC software and to e-mail them.
You can adjust video and lightning settings for the camera, and audio settings. Please see §6.2
Audio settings p 37 and §6.4 Video settings p 38.
To install and to set the dedicated Depaepe software for PC, please see §8 Video pop-up for PC
p 44.
3.8. Hearing aid induction coil
The SecurAccess SIP PMR is equipped with an induction coil so that a person wearing a hearing
device can hear the conversation (loudspeaker out).
This feature is permanently enabled, no adjustment is required.
4. General programming
4.1. Standard settings
The SecurAccess SIP PMR doorphone comes with default settings:
Ip address: 192.168.1.250
Subnet mask: 255.255.0.0
SIP mode: P2P (static IP address)
User name: admin
password : 1234
All models are fitted with a programming switch (see pictures p 8 and next), that lets you
restore these default IP settings of the doorphone.
1: Always on the ‘ON’ position
2: ON = default IP configuration
OFF= ‘normal’ operation
The right switch 2 allows to restore the default IP configuration: place the right switch 2 on ‘ON’
position, and then disconnect and reconnect the Ethernet cable (PoE) or the power supply. The
doorphone will be restored and reboot. Its IP address is 192.168.1.250. After the reboot of the
unit, place the right switch 2 on ‘OFF’ position (normal).