Denyo DCA-13LSK, Инструкция по эксплуатации

Страница: 19 / 61

(3) Circuit breaker
This is a main switch to supply power to a load. When the
load is shorted or in the state of overload, it trips to protect
the generator against trouble.
[Note] :
Do not use this circuit breaker to turn ON/OFF the load, to
prevent damage to the circuit breaker.
When it trips with over-current, the handle of the breaker
stops between ON and OFF positions. This is what is called
the trip condition.
In this case, push the handle down to the OFF position to
reset it, or else, it cannot be set in ON position.
Voltage regulator
(1) Voltage regulator
This regulator is used to control the output voltage. Turn the
regulator to clockwise to increase the voltage and counter­
clockwise to decrease it. Adjust the voltage to the rated
voltage with this regulator.
ШШ !№ №
15