TC-17C
INSTRUCTION MANUAL
ENG-1
SAFETY PRECAUTIONS
RIS K OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO MINIMISE THE RISK OF ELECTRIC SHOCK,
NEVER REMOVE THE COVER. THIS PRODUCT CONTAINS
NO USER-SERVICEABLE PARTS. ONLY QUALIFIED
REPAIR TECHNICIANS SHOULD WORK ON THIS
EQUIPMENTS.
HARZARD WARNING
Read this instruction and safety manual carefully before use. Keep this manual in a safe place for further
reference.
WARNINGS
To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.
The lightning symbol inside an equilateral
triangle warns the user of the presence inside the
product of uninsulated hazardous electric
voltages powerful enough to represent an
electrocution risk.
The exclamation mark symbol inside an
equilateral triangle warns the user that important
operating and servicing (troubleshooting)
instructions are contained in the documentation
accompanying the product.
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE1
PRODUIT LASER DE CLASSE1
CAUTIONS
I N V I S I B L E L A S E R R A D I AT I O N
WHEN OPEN AND INTERLOCKS
DEFEATED. AVOID EXPOSURE
TO BEAM.
EXPLANATION OF GRAPHIC SYMOBOLS.
HAZARD WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
CLASS 1 LASER PRODUCT
This product contains a low-power emitter.
PRECAUTIONS FOR USE
To ensure safe use of this product, please follow the
advice below:
Positioning
Power supply
Safety instructions
Do not use the product in extremely hot, cold, dusty
or damp condition.
Place the product on a smooth, flat surface.
Do not obstruct the flow of air through the product.
Place it on a well-ventilated position; do not cover
with fabric or stand on a rug or carpet.
Before using this product, check that its rated
voltage matches your mains power supply voltage.
Never pull on the power cord when plugging in or un-
plugging the product: always use the plug pulling the
cord could damage it and create a risk of electric
shock.
Unplug the product from the mains socket if you do
not intend to use it for an extended period.
The On/Off button does not isolate the product from
the power supply. To disconnect the product from the
mains power supply, you must unplug the power cord.
This product should only be used in a horizontal
position.
The power cable/disconnect device shall remain easy
to operate/disconnect.
Condensation
In the event of a problem, unplug the power cord and
contact a qualified repair technician.
Ventilation precautions
Warning concerning liquids
Do not allow liquids to splash or spill onto the product,
and never stand a liquid-filled container (vase, jar,
etc.)on the top of it.
Warning concerning excessive sound levels
Water droplets or condensation may from inside it is
moved into a very warm, humid atmosphere.
Condensation can cause the product to malfunction.
Leave the set in a warm room for 1 to 2 hours to allow
the condensation to evaporate.
Never obstruct the product’s ventilation holes.
Owing to this product’s extremely low noise output
and extended dynamic range, the user may be
tempted to turn up the volume louder than necessary.
The sound output may be excessively high, to the
point of damaging the product’s headphones or
l o u d s p e a k e r. A l w a y s k e e p t h e v o l u m e w i t h i n
reasonable limits.
Owner’s record
For your convenience, record the model number and serial number for future reference.
Model :____________________________________Serial number :_____________________________
PORTABLE CD BOOMBOX WITH
ANALOGUE AM/FM RADIO
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
www.denver-electronics.com
