12
Power On: Long press the power button until the display lights up.
Power Off: Long press the power button until the display goes out and the system is off.
1. Battery power display: it shows the current remaining battery capacity.
2. Power off automatically: After the display is idle for more than 5 minutes, the Electric scooter
automatically turns off.
Change display information: When the Electric scooter is on, short press the power button
, change
the showing data on the display, TIME, ODO, DIS and other characters respectively. When it is showing
time, it indicates the running time after switching on. The time will be cleared after switching off. When
it is showing DIS, it indicates the driving distance after switching on, and it will be cleared after power off.
When it is showing ODO, it indicates the total mileage, which will be retained unless it is manually
cleared.
Change the gear: Short press
▲
or
▼
button to change the gear level (Gear 3 is fast speed, Gear 2 is
medium speed, and Gear 1 is slow speed).
Acceleration: Gently press the accelerator button to speed up (The depth of the press is related to the
gear level you have set).
Deceleration: Gently press the deceleration dial to slow down. The deeper the press, the greater the
deceleration (the deceleration is relevant to the formation of the press, and pushing too hard can not
increase the braking force and may cause damage to the brake dial).
Clear total mileage: Press
▲
and
▼
buttons at the same time, then press the power button
to
switch on the Electric scooter, and the total mileage will be cleared.
Important: Press
▲
and
▼
buttons at the same time, then press the power button
and select P3
mode, when parameter value is 0, it will start with zero. When parameter value is 1, it will start with non
-zero.
(Zero start: When starting, the Electric scooter in a stationary case, press the accelerator to start driving.)
(Non-zero start: When starting, the Electric scooter is static, press the accelerator and the Electric
scooter does not work, push the Electric scooter manually to start driving, the Electric scooter works.
factory default is non-zero start. )
You have to manually move the Electric scooter with your foot before the accelerator button works.
9 Electric scooter riding
