Denver ORIENT POWER OPSOLAR 48100PW, Руководство пользователя

Страница: 11 / 30

10
3 Run LED Running signal
4 ALM LED Blinking in alarm status
5 SOC State of charge
6 B Positive terminal
7 Battery - Negative terminal
8 POWER BMS on/off
9 MCB Positive isolating
10 On/Off Status indication
11 RST Reset key
12 ADS Battery address selector
13 DCT 2 loops dry contact
14 RS485A Communication with inverter
15 CAN Communication with inverter
16 RS232 Communication with PC
17 RS485B Battery parallel communication
18 RS485B Battery parallel communication
2.4 General
2.4.1 Power & RST Key
Power Key On/Off BMS
RST Key
In the non-standby state of BMS, press the key
for 10S, until all LED light up for reset.
2.4.2 Breaker
Battery positive loop equipped with breaker, rated 125A, able to operate in DC system,
designed for isolating positive while do wiring, also acting as secondary protection in addition
to Smart BMS protection.