CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lighting flash with
arrowhead symbol, with
an equilateral triangle is
intented to alert the user
of the presence of
uninsulated dangerous
voltage within the
product's enclosure that
may be of sufficient
magnitude to constitute a
risk of electric shock to
persons.
CAUTION: TO REDUCE
T H E
R I S K
O F
ELECTRIC SHOCK, DO
NOT REMOVE COVER
(OR BACK). NO USER
SERVICEABLE PARTS
I N S I D E .
R E F E R
S E RV I C I N G
T O
QUALIFIED SERVICE
PERSONNEL.
The exclamation point
within an equilateral
triangle to intended to
alert the user of presence
of important operating
and
maintenance
(servicing) instruction.
In
the
literature
accompanying
the
appliance.
Note:
Check your batteries regularly. Old or discharged batteries should be
replaced. If the unit is not to be used for sometime or is being run
exclusively on AC electrical current, remove batteries from the battery
compartment to avoid leakage.
Warning: Before using the unit. Check that the local mains supply is compatible
with the Unit Do not plug or unplug the power cable when your hands
wet.
When planning not to use this unit for long periods of time (i.e. Vacation
etc.) disconnect the plug from the wall outlet.
BATTERY SAFETY PRECAUTIONS:
●
Keep batteries away from children and pets.
●
Insert the batteries observing the proper polarity (+/-). Failure to properly
align the battery polarity can cause personal injury and/or property damage.
●
Remove old or discharged batteries from the product. Remove the batteries
when the product will not be used for extended periods of time to prevent
damage due to rusted or corroded batteries
●
Never throw batteries into a fire, do not expose batteries to fire or other heat
sources
●
Battery Disposal: Old or discharged batteries must be properly disposed of
and recycled in compliance with all applicable laws. For detailed
information, contact your local solid waste authority
●
Follow the battery manufacturer’s safety, usage, and disposal instructions.
OPERATION
Press the Standby button to turn the unit.
IN DAB MODE
1. Press the DAB/FM button to select DAB radio mode
i. Auto select : Press the AUTO-SCAN button, “AUTOTUNE FULL SCAN”
will show on the display, and the number of DAB station will shown on the
upper right corner, and it will automatically play the first station. Press
/ TUNING- to choose the next or previous station.
ii. Manual select: press and hold the ENTER button until the “MANUAL
TUNE” icon shown on the display, then press / TUNING- to
choose the station.
Note : you many have to wait for the unit to tune in to the new channel.
1. Carrying Handle
2. Antenna
3. LCD Display
4. Tuning- button
5. Vol+ button
6. Vol- button
7. button
8. Enter button
9. Alarm/Sleep button
10. Speaker
11. Info/Setup button
12. Memory up button
13. Memory button
14. DAB/FM button
15. Auto-Scan button
16. Standby button
17. DC jack
18. Aux-in jack
19. Battery compartment
POWER SUPPLY
OPERATING THE UNIT ON AC POWER
Insert one end at the supplied power cord to the DC 6V IN Jack located at the rear of
the unit and the other end into the Wall outlet.
When the First time used the cord has to be firmly pushed into the socket if does not
work on AC, to try again to be sure for a positive connection.
OPERATING THE UNIT ON BATTERIES
1. To play your unit on batteries, the AC power cord must be disconnected from the
player.
2. Unplug the AC power cord from the unit and insert 4 size “C” batteries (not
provided) in the compartment.
3. Close the battery compartment door.
CAUTION :
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
WAARSCHUWING:
STEL HET APPARAAT NOOIT BLOOT AAN REGEN OF VOCHT OM HET
RISICO OP BRAND OF ELEKTRISCHE SCHOKKEN TE REDUCEREN.
ENGLISH
DAB-44
DAB / FM RADIO
1
17
18
19
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Denver TR-44
(Eng) 210 x297mmm • 16.6.2012
LOCATION OF CONTROL
