64 78 759 D3608
86
D3608
.
201.01.07
.
02 10.2017
7 Maintenance and cleaning
Dentsply Sirona
7.8 Procedure for processing sintering metal
Operating Instructions inLab MC X5
7.8.2
Before processing sintering metal materials
1. Change to the suction bellows intended for sintering metal
processing (for notes on making the change, see "Suction bellows
2. Connect the tank intended for sintering metal processing (to connect
it, see "Connecting the coolant tank [ → 30]").
7.8.3
After processing sintering metal materials
1. Clean the drain hose to the tank using suitable cleaning brushes (e.g.
in those contained in the “Starter Kit Sintering Metal inLab MC X5
REF 65 61 986”).
2. Perform an automatic cleaning process (without a clamped round) via
the service menu of the inLab CAM SW.
3. Separate the tank for sintering metal material processing and
connect the tank for the remaining materials.
4. Change back to the suction bellows for the non-sintering metal
materials.
5. Wipe off the compartment where necessary.
IMPORTANT
Once the water has been changed, the collecting vessel will contain a
mixture of sintering metal slurry (in mixed operation, there will also be
other materials) and water. The machining particles dispersed in the
water will settle to the bottom of the collecting vessel within 24h,
resulting in a clear separation between the water and the settled solid
matter.
The clear water can then be removed or siphoned off from the collecting
vessel. The collecting vessel can be used until it is max. half-full of
grinding slurry (solid matter) or until the permitted weight for the
collecting vessel used has been reached. 5 L of correctly sorted
sintering metal machining waste corresponds to 40 kg in weight
depending on the sintering metal alloy.
IMPORTANT
Sirona recommends using a separate tool magazine (REF: 64 78 528)
for equipping sintering metal tools in order to prevent contamination on
other tools.
IMPORTANT
Sirona recommends using separate suction bellows (REF: 64 96 686)
for processing sintering metal materials.
