manualshive.com logo in svg

DENTSPLY inLab MC X5, Руководство по эксплуатации

Поделиться
Скачать
DENTSPLY inLab MC X5 Скачать руководство пользователя страница 27

64 78 759 D3608

D3608

.

201.01.07

.

02 10.2017

27

Dentsply Sirona 

4 Transportation and installation

Operating Instructions inLab MC X5

4.1 Transport and unpacking

båÖäáëÜ

4

Transportation and installation

4.1

Transport and unpacking

All products from Dentsply Sirona are carefully checked prior to shipment. 

Please perform an incoming inspection immediately after delivery.
1. Check the delivery note to ensure that the consignment is complete.
2. Check whether the product shows any visible signs of damage.

If return shipment is required, please use the original packaging for 

shipment.

Transportation without packaging

4.2

Disposal of packaging materials

The packaging must be disposed of in compliance with the relevant 

national regulations. Please observe the regulations applicable in your 

country.

NOTICE 

Damage during transport
If the product was damaged during transport, please contact your 

carrying agent.

CAUTION

Damage to the unit or risk of injury during transport without packaging
There is a danger of the unit falling down if it is grasped by its plastic 

housing.
➢ The unit should always be carried by three persons.
➢ Do not grasp the unit by its plastic housing.
➢ Always grasp the unit by the base of the unit next to its feet.

Содержание inLab MC X5













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды