Dentsply Maillefer X-SMART IQ, Руководство пользователя, Страница: 29 / 74

Step by Step Instructions
F1902142.EN / 05 / 2015 / updated 02/2016
29/74
6.6.1.3 Description of the Sounds
6.6.1.4 Stand-by Mode
When the motor handpiece is not used for a certain period of time, it
enters stand-by mode as described below.
Mode Description
Device running in
continuous rotation
Intermittent sound when:
•
The device is rotating in reverse.
• The torque measured is about 75% over the defined
torque.
Device running in
reciprocating
motion Intermittent sound when:
•
The instrument is subject to increased friction,
• After switching to forward rotation.
Battery charge level
• One short beep when the battery charge level is low.
• Three-second beep when the battery charge level is
critical.
Motor START/STOP
button
A short beep when pressing the button.
Multifunction button A short beep when pressing the button.
Mode LED description
Application
display
Wake-up action
Device active All LEDs ON.
Bluetooth
®
ON,

device visible on
status bar.
None.
(Device ready to
be used).
Stand-by mode 1
(inactive for 35 s)
All LEDs ON.
Motor START/
STOP button
blinking blue
every 3 s.
Bluetooth
®
ON,
device visible on
status bar.
Pick-up the motor
handpiece.
Stand-by mode 2
(inactive for 30 min)
All LEDs OFF.
Bluetooth
®
OFF,
device not visible
on status bar.
Press the
multifunction
button.