Denso SE1-QB, Руководство пользователя

Страница: 29 / 98

16
Chapter 6 Magic Key Control
When the scanner is turned off, pressing the magic key will start the Bluetooth
®
wireless link. Using the scanner when the
“End operation” is selected requires scanning the “Start operation” QR Code symbols given in Section 11.2 with the
procedure in Section 11.1. (When the scanner is turned on, pressing the trigger switch will start the Bluetooth
®
wireless link.)
To end the Bluetooth
®
wireless link, hold down the magic key for at least five seconds. Breaking of the Bluetooth
®
wireless
link by using the magic key can be disabled in the configuration software.
Setting of the software keyboard function can be changed only when connecting the scanner to iPhone or iPad. Whether or not
to display the software keyboard can be switched by pressing the magic key for approx. 500 msec.
When the scanner is not used for a long time, turn the scanner off by holding the trigger switch and the magic key down for
three seconds or more.