Denso Intelligent Tester II Скачать руководство пользователя страница 123

Страница: 123 / 136

7 Handling

- 114 -

This product uses a lithium ion battery. When replacing the battery, read the cautions below carefully and replace the battery
correctly and safely.

Battery Replacement

WARNING

Always observe the following rules. Failure to do so can result in heat generation, fire, blowout, or battery fluid

leakage.

Do not use any battery other than the lithium ion battery supplied by DENSO (95171-10341).

Do not heat or burn the battery.

Do not disassemble or alter this battery.

Do not short the terminals.

Do not use, charge, or leave the battery in any high-temperature location.

CAUTION

Correctly dispose of used-up batteries in accordance with legal requirements.

Email: [email protected] Skype: obd2express.co.uk

Содержание Intelligent Tester II









































































































































Результаты поиска

Содержание Intelligent Tester II

Отзывы:

Бренды по названию

Популярные бренды

Denso Intelligent Tester II, Руководство оператора

Результаты поиска

Содержание Intelligent Tester II

Отзывы:

Бренды по названию

Популярные бренды