Denso BHT-BASIC 100 SERIES Скачать руководство пользователя страница 46

Страница: 46 / 577

[ 2 ]

Options

The BHT-BASIC 3.5 Compiler supports three types of options—compiler processing options,
compiling options, and linking option.

■

Compiler processing options

Processing options

Description

Compiles one or more designated file(s) into object file(s).

+B programname

Builds a user program with the specified program name. If

programname

is specified, the filename specified

first will apply.

+BL libraryname

Builds a library with the specified library name. If no

libraryname

is specified, the filename specified first

will apply.

+E, -E

Determines whether to terminate the BHT-BASIC 3.5
Compiler after completion of processing.

Specifying the

terminates the Compiler without display-

ing the compiler window after completion of processing.

Specifying the

-E

displays the compiler window and does

not terminate the Compiler even after completion of pro-
cessing.

The default is

-E

NOTE

If more than one option with different specifications is written (e.g., +C, +B, and
+BL), the last option takes effect.

If the same option is set more than one time with different specifications (e.g., +E and
-E), the last option takes effect.

Содержание BHT-BASIC 100 SERIES


































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание BHT-BASIC 100 SERIES

Отзывы:

Denso BHT-BASIC 100 SERIES, Руководство программиста, Страница: 46 / 577

Результаты поиска

Содержание BHT-BASIC 100 SERIES

Отзывы: