Denso BHT-BASIC 100 SERIES Скачать руководство пользователя страница 447

Страница: 447 / 577

Chapter 18. TCP/IP

439

18.2.3

Programming Notes for TCP/IP Communica-
tion

If TCP/IP communication becomes no longer possible during data transmission, any of the fol-
lowing run-time errors will be returned:

Run-time errors:

■

Error recovery procedure from run-time errors 105h, 106h, and 108h

(1)

Use the

ERROR

GOTO

statement for error interrupt (In the error-handling routine,

none of (3) through (5) should be carried out.)

(2)

Use the

RESUME

statement for transferring control to the main program

(3)

Close the socket.

(4)

Disconnect the TCP/IP communications pathway.

(5)

Close the spread spectrum communications device.

For details, refer to Subsection 18.2.4, "Sample Program."

Error code

Meaning

105h

Power-off detected. (The BHT has been turned off during data
transmission and then turned on. The communications device
remains off.)

106h

An internal error has occurred in the TCP/IP module during data
transmission.

108h

The memory for the TCP/IP module has became insufficient dur-
ing data transmission.

Содержание BHT-BASIC 100 SERIES


































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание BHT-BASIC 100 SERIES

Отзывы:

Denso BHT-BASIC 100 SERIES, Руководство программиста, Страница: 447 / 577

Результаты поиска

Содержание BHT-BASIC 100 SERIES

Отзывы: